This research aim to study the effect of using marble powder as partially replace of cement on the properties of concrete. The main variable taken into consideration is the percentage of marble powder as partial replacement of cement content in concrete mixture. The experimental results shows that using definite amount of marble powder ...

marble powder the Split Tensile strength decreases. • Thus we found out the optimum percentage for replacement of marble powder with cement and it is almost 10% cement for both cubes and cylinders. • We have put forth a simple step to minimize the costs for construction with usage of marble powder which is freely or cheaply available; more ...

Shirule et al: studied the ―Partial Replacement of cement with Marble Dust Powder‖. It can be concluded that for M20 grade concrete The Compressive strength of Cubes are increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the compressive strength decreases.

The water cement ratio (0.43) kept constant throughout the investigation of this project work. To study the physical properties of marble dust powder To characterize the particle size of marble dust powder MDP as a replacement of cement material. To study the effect of MDP inclusion on the properties of concrete. II.

A. Study Of Compressive Strength Of Concrete By Partial Replacement Of Cement With Marble Dust Powder[4] Abdullah Anwar, Juned Ahmad, Meraj Ahmad, Khan Sabih, Ahmad Syed, Aqeel Ahmad Abdullah Anwar & his teammates stated that marble dust powder is now days intensely focused research topic in which many problem related to environmental …

Kumar and S. K. Kumar, "Partial replacement of cement with marble dust powder," International Journal of Engineering Research and Applications, vol. 5, no. 8, pp. 106-114, 2015; 3. A. Ergün, "Effects of the …

Abstract. Marble powder has been identified as a low costing material with the potential to redress the problem. The specimen has been prepared and tested for the strength with partial replacement of marble powder and cement in concrete The Compressive strength, Split Tensile strength, Flexural strength and Modulus of elasticity of Concrete can ...

Partial replacement of marble powder in cement accordingly in the range of 20%, 30%, 40%, by weight for M20 grade of concrete. With this experimental research work the problem of waste production management of this agro waste are will …

In this study, use of glass powder and marble powder as partial replacement of cement in various proportions (5%, 10%, and 15% by weight) in manufacturing of non-load bearing hollow concrete ...

In this subject, both marble powder (MP) and GGBS were replaced binder material of CC that is replacement of cement. The replacement of cement is 0, 5%, 10%, 15% for marble powder, and for GGBS 0% ...

Aliabdoet.al. [12], studied the replacement of cement or sand by marble powder for improvement in concrete properties. It shows that sand replacement gives better results as compare to cement replacement. Also, AlirezaNaji et al. [9], studied that average particle size of rice husk provides positive effect on compressive

Keeping the above in view, cement is partially refilled with marble powder in concrete. Concrete blocks replaced with 5%, 10%, 15% & 20%. Marble powder have been prepared and compared with standard blocks of conventional cement. These blocks are then tested for properties like compressive strength and tensile strength.

The experimental results for M30 concrete shows that 10% replacement of cement with marble dust in concrete can be used, with an increase in compressive strength as 22.69 %, 20.10%, 23.27%, 15.58% and 12.77% for 28 days, 56 days, 118 days, 208 days and 393 days respectively, whereas in presence of sulphate solution, compressive strength ...

replacement of cement with marble dust powder is about 10%. This will post less on the production of carbon dioxide and solving the environmental pollution by cement production, thereby enhances the urban surroundings. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 05 | May-2018

The use of marble powder dust offers cost reduction, energy savings, arguably superior products and fewer hazards in environment. Its addition helps in sustainable development. Marble powder adsorbs more water than cement. As a result, the ratio of water available for hydration is reduced leading to better mechanical strengths.

Replacement of Cement with Marble Dust Powder on Properties of Concrete Authors: Shanu Sharma; Siddharth Pastariya; Gajendra Kumar Verma PG Student1; Assistant Professor2,3 Department of Civil Engineering1,2,3 Sri Aurobindo Institute of Technology, Indore1,2,3 ABSTRACT: Concrete is the most extensively used and adaptable

5% of cement replaced by marble powder = 377.38gm 10% of marble powder = 754.7 gm 15% of marble powder = 1.13 kg 20 %of marble powder = 1.5094 kg Compressive strength of concrete was undertaken on 15 cm cubic specimens. …

In this study, use of glass powder and marble powder as partial replacement of cement in various proportions (5%, 10%, and 15% by weight) in manufacturing of non-load bearing hollow concrete ...

the replacement of cement by marble dust powder we can achieve a greener construction. Fig 2 shows marble dust powder available in processing plant whereas fig 3 shows the Percentage of marble powder 1 2 3 Avg. compressive Strength in N/mm2 0 18.66 24.88 25.33 24.73 26.66 5 28.00 27.55 27.40 10 30.22 ...

Based on the data, a mix design for M30 grade concrete is made and the replacement of cement with marble powder by 0%, 5%, 10%, 15%, 20% and 25% is considered. The proportions of the basic constituents of concrete for all the six mix ratios are presented in table 3.

This paper presents the study of concrete mix design using marble powder. The disposal of marble powder from the marble industry is one of the environmental problems today. The places where marble is used for various purposes, the use of marble powder can be included for construction purpose Marble powder is produced from processing plant during the sawing …

between the surface of marble powder and cement and core compressive strength is attained at 10% replacement of marble dust concrete [17] -[18]. Satish et al [19], worked extensively on the hardened properties of bituminous concrete with marble dust as filler. Fillers are fine aggregate material that passes 0.063mm sieve [20].

The chemical and physical properties of marble dust powder used in this experimental work have been studied and results are given in Table 3 and Table No.4 below. ... Experimental Study on Partial...

Five concrete mixtures containing 0%, 5%, 10%, and 20% marble dust powder as cement replacement by weight basis has been prepared. Water/cement ratio (0.43) was kept constant, in all the concrete mixes. …

1. The results indicate that marble powder could replace cement and have more quality compared to normal concrete, increasing compressive strength by 30%. 2. For concrete, its tensile strength increases up to 20% substitution, and for 30% substitution, there can be a slight reduction in quality, so 20% seems ideal. 3.

The replacement of cement by marble powder and granite powder is in the fractions of 0%, 5%, 10%, 15%, 20%, 25% and 30%. A total number of specimens (80 mm × 50 mm) casted for this RCPT is 39 out of which 3 numbers is for control specimens, 18 numbers is for marble powder replacement and 18 numbers is for granite powder replacement. ...

The partial replacement of cement by marble powder is used up to M25 grade concrete. The strength decreases beyond the use of M 25 grade, but shall be improved on the addition of super plasticizer. As per the comparative study on use of super plasticizer the strength is increased by 2% for M30 in 28 ...

replacement of fly ash and marble powder for the cement to find out mechanical properties of concrete. The fly ash and marble powder were replaced within the percentage of 0%, 5%, 10%, and 15% and20%. The strength of concrete has been found for both M20 and M25 mixes. The compressive and split tensile strength of concrete was evaluated after 28

containing 0%, 5%, 10%, and 20% MDP as cement replacement by weight basis has been prepared. Water/cement ratio (0.43) was kept constant, in …

The utilization of marble dust powder (MDP) as cement replacement was studied in [12]. The cement was partially replaced with MDP up to 20% by weight with an increment of 5%. ... ... Authors in...

For short term curing duration, replacement of marble powder with cement reduced compressive strength insignificantly for 5% and 10% marble powder replacement, but, reduced it significantly for 15 ...

The increasing of marble powder ratio as a replacement of cement over the optimum dosage to the segregation of aggregates and bleeding of cement and aggregates lead to decrease the resistance of concrete. Increasing compressive strength by about (25% and 8%) for the marble powder replacement ratio (5% and 7.5 %) compared to the control mix.